Opublikowano:

Uszkodzony kabel SATA ?

Taką usterkę należy zgłaszać jako uszkodzony dysk czy jako Zaplanuj interwencję hardware -> Inne ?

Cytat:

ata4.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
ata4.00: failed command: FLUSH CACHE EXT
ata4.00: cmd ea/00:00:00:00:00/00:00:00:00:00/a0 tag 0
res 40/00:00:00:00:00/00:00:00:00:00/a0 Emask 0x4 (timeout)
ata4.00: status: { DRDY }
ata4: hard resetting link
ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata4.00: qc timeout (cmd 0xec)
ata4.00: failed to IDENTIFY (I/O error, err_mask=0x4)
ata4.00: revalidation failed (errno=-5)
ata4: hard resetting link
ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata4.00: configured for UDMA/133
ata4.00: retrying FLUSH 0xea Emask 0x4
ata4.00: device reported invalid CHS sector 0
ata4: EH complete
show_signal_msg: 6 callbacks suppressed


Cytat:

smartctl -a /dev/sdd
smartctl 5.40 2010-10-16 r3189 [x86_64-unknown-linux-gnu] (local build)
Copyright (C) 2002-10 by Bruce Allen, http://smartmontools.sourceforge.net

=== START OF INFORMATION SECTION ===
Model Family: Seagate Barracuda 7200.12 family
Device Model: ST31000528AS
Serial Number: 9VP5FLVW
Firmware Version: CC46
User Capacity: 1,000,204,886,016 bytes
Device is: In smartctl database [for details use: -P show]
ATA Version is: 8
ATA Standard is: ATA-8-ACS revision 4
Local Time is: Tue Apr 26 10:50:59 2011 CEST
SMART support is: Available – device has SMART capability.
SMART support is: Enabled

=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED

General SMART Values:
Offline data collection status: (0x82) Offline data collection activity
was completed without error.
Auto Offline Data Collection: Enabled.
Self-test execution status: ( 0) The previous self-test routine completed
without error or no self-test has ever
been run.
Total time to complete Offline
data collection: ( 600) seconds.
Offline data collection
capabilities: (0x7b) SMART execute Offline immediate.
Auto Offline data collection on/off support.
Suspend Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 1) minutes.
Extended self-test routine
recommended polling time: ( 168) minutes.
Conveyance self-test routine
recommended polling time: ( 2) minutes.
SCT capabilities: (0x103f) SCT Status supported.
SCT Error Recovery Control supported.
SCT Feature Control supported.
SCT Data Table supported.

SMART Attributes Data Structure revision number: 10
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
1 Raw_Read_Error_Rate 0x000f 116 099 006 Pre-fail Always – 116330474
3 Spin_Up_Time 0x0003 096 095 000 Pre-fail Always – 0
4 Start_Stop_Count 0x0032 100 100 020 Old_age Always – 166
5 Reallocated_Sector_Ct 0x0033 100 100 036 Pre-fail Always – 0
7 Seek_Error_Rate 0x000f 084 060 030 Pre-fail Always – 241708156
9 Power_On_Hours 0x0032 093 093 000 Old_age Always – 6657
10 Spin_Retry_Count 0x0013 100 100 097 Pre-fail Always – 0
12 Power_Cycle_Count 0x0032 100 100 020 Old_age Always – 83
183 Runtime_Bad_Block 0x0032 100 100 000 Old_age Always – 0
184 End-to-End_Error 0x0032 100 100 099 Old_age Always – 0
187 Reported_Uncorrect 0x0032 100 100 000 Old_age Always – 0
188 Command_Timeout 0x0032 100 098 000 Old_age Always – 34360393738
189 High_Fly_Writes 0x003a 100 100 000 Old_age Always – 0
190 Airflow_Temperature_Cel 0x0022 065 053 045 Old_age Always – 35 (Min/Max 31/47)
194 Temperature_Celsius 0x0022 035 047 000 Old_age Always – 35 (0 21 0 0)
195 Hardware_ECC_Recovered 0x001a 043 012 000 Old_age Always – 116330474
197 Current_Pending_Sector 0x0012 100 100 000 Old_age Always – 0
198 Offline_Uncorrectable 0x0010 100 100 000 Old_age Offline – 0
199 UDMA_CRC_Error_Count 0x003e 200 200 000 Old_age Always – 0
240 Head_Flying_Hours 0x0000 100 253 000 Old_age Offline – 184790967917269
241 Total_LBAs_Written 0x0000 100 253 000 Old_age Offline – 1376834895
242 Total_LBAs_Read 0x0000 100 253 000 Old_age Offline – 746376221

SMART Error Log Version: 1
No Errors Logged

SMART Self-test log structure revision number 1
Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
# 1 Short offline Completed without error 00% 6649 –
# 2 Short offline Completed without error 00% 6278 –
# 3 Short offline Completed without error 00% 5849 –
# 4 Short offline Completed without error 00% 4845 –
# 5 Extended offline Aborted by host 90% 1870 –
# 6 Extended offline Interrupted (host reset) 00% 1425 –
# 7 Short offline Completed without error 00% 1371 –
# 8 Short offline Completed without error 00% 1347 –
# 9 Short offline Completed without error 00% 1323 –
#10 Short offline Completed without error 00% 1302 –
#11 Short offline Completed without error 00% 1275 –
#12 Extended offline Interrupted (host reset) 00% 1259 –
#13 Short offline Completed without error 00% 1204 –
#14 Short offline Completed without error 00% 1180 –
#15 Short offline Completed without error 00% 1156 –
#16 Short offline Completed without error 00% 1135 –
#17 Short offline Completed without error 00% 1108 –
#18 Short offline Completed without error 00% 1084 –
#19 Short offline Completed without error 00% 1062 –
#20 Short offline Completed without error 00% 1038 –
#21 Short offline Completed without error 00% 1014 –

SMART Selective self-test log data structure revision number 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.